Precision Auto Injectors

Ford F-150 Fuel Injectors

Here is every rebuilt genuine Ford injector set we offer for the 1999-2002, 2005-2007 and 2009-2017 Ford F-150, listed by year and engine. Each row shows the part number, so you can check it against the number on your injectors.

Find your set

An F-150 with dirty injectors shudders at idle and feels flat when you lean on it. It shows most when you're towing, or climbing a ramp with a full bed. A misfire code and the check engine light usually come with it. On these trucks, look at the plugs and coils before anything else. When those are good, dirty injectors are one of the usual causes. Gum and varnish from old gas is what sticks them, and a farm truck that sits half the year gets it worst.

Every set we sell starts with genuine OEM injectors, not overseas copies. Each one is ultrasonically cleaned, fitted with new filter baskets, O-rings and seals, flow tested on our ASNU bench, and matched into a set within 2% of each other. Sets ship ready to install.

Find your F-150 injector set in three steps

1. Start with year and engine
One year can come with two engines. Know both.
2. Read the number on your injector
It is printed on the injector. Read it where it sits.
3. Match it on the chart
Find that number below. Not there? Message us your year, make, model and engine.

Ford F-150 injector chart

Photo Years Engine Part number Shop
Rebuilt BR3E-F5A fuel injector set for 2015-2017 Ford F-150 3.5L V6, non-turbo, gas or flex fuel 2015-2017 3.5L V6, non-turbo, gas or flex fuel BR3E-F5A / BR3Z-9F593-B, Bosch 0280158191 Shop BR3E-F5A set of 6
Rebuilt BR3E-E5A fuel injector set for 2011-2017 Ford F-150 5.0L V8, gas or flex fuel 2011-2017 5.0L V8, gas or flex fuel BR3E-E5A / BR3Z-9F593-A, Bosch 0280158227 Shop BR3E-E5A set of 8
Rebuilt BR3E-F5A fuel injector set for 2011-2014 Ford F-150 3.7L V6, gas or flex fuel 2011-2014 3.7L V6, gas or flex fuel BR3E-F5A / BR3Z-9F593-B, Bosch 0280158191 Shop BR3E-F5A set of 6
Rebuilt 9L3E-E7A fuel injector set for 2009-2010 Ford F-150 4.6L V8, 3-valve 2009-2010 4.6L V8, 3-valve 9L3E-E7A / F7A, Denso 195500-4821 Shop 9L3E-E7A set of 8
Rebuilt 9W7E-A7A fuel injector set for 2009-2010 Ford F-150 4.6L V8, 2-valve 2009-2010 4.6L V8, 2-valve 9W7E-A7A / B7A, Denso 195500-4780 Shop 9W7E-A7A set of 8
Rebuilt 5C3E-DC fuel injector set for 2005-2007 Ford F-150 5.4L V8, match your injector 2005-2007 5.4L V8, match your injector 5C3E-DC / 5C3Z-9F593-DB Shop 5C3E-DC set of 8
Rebuilt XR3E-A6B fuel injector set for 1999-2002 Ford F-150 4.2L V6, match your injector 1999-2002 4.2L V6, match your injector XR3E-A6B / XR3E-9F593-AB Shop XR3E-A6B set of 6

Here's when the F-150's injectors changed:

  • 1999: the 4.2L V6 takes XR3E-A6B. From 2000 on, many trucks read YR3E-A6A.
  • 2004: the redesigned truck brought the 3-valve 5.4L with a new injector.
  • 2005: the 5.4L moved to 5C3E-DC. It changed again during 2007.
  • 2009: the 4.6L split into a 2-valve and a 3-valve, each with its own injector.
  • 2011: the 3.7L V6 and the 5.0L V8 replaced the old engines.

Not on the chart: the 1997-2004 4.6L and 5.4L, the 2003-2008 4.2L, the 2004-2008 4.6L, the 2008 5.4L and the 2009-2010 5.4L. Each takes a number we don't have on this chart. Tell us your year, model and engine and the number on your injector, and we'll point you to the right set.

Not on the chart: the EcoBoost engines, the 6.2L and all 2018 and newer trucks. We don't stock sets for those. Message us and we'll tell you what we can do.

Not on the chart: 1998 and older trucks. Send us the number on your injector and we'll check it.

Not sure which set fits your F-150?

Match the part number. The fastest way to be sure is to read the number printed on one of your injectors and match it to the listing. If your number isn't on this page, send it to us. We'll find the right set, or tell you straight if we don't have it.

Ford changed F-150 injectors often, and one engine size can mean two different sets. The 2009-2010 4.6L is the big one: it came as a 2-valve and a 3-valve, and they don't share injectors. The number is on the injector body. On some of these engines a flashlight and a rag will do it. On others the engine cover or the upper intake has to come off first. Not sure what you have? Message us your year, model and engine, or call (407) 536-4509. You can also email a picture of your injector to precisionautoinjectors@yahoo.com. We ship from Sanford, Florida, and most sets go out the same business day.

F-150 3.5L V6 (2015-2017): BR3E-F5A

Rebuilt Ford BR3E-F5A / Bosch 0280158191 fuel injector set of 6 for 2015-2017 F-150 3.5L V6

The non-turbo 3.5L V6 takes BR3E-F5A, Ford BR3Z-9F593-B, built by Bosch as 0280158191. This set is not for the EcoBoost. Those are direct injection and take a different part.

Shop rebuilt Ford BR3E-F5A / Bosch 0280158191 set of 6 for 2015-2017 F-150 3.5L V6

F-150 5.0L V8 (2011-2017): BR3E-E5A

Rebuilt Ford BR3E-E5A / Bosch 0280158227 fuel injector set of 8 for 2011-2017 F-150 5.0L

The 5.0L from 2011 through 2017 takes BR3E-E5A, Ford BR3Z-9F593-A, Bosch 0280158227. Gas and flex-fuel trucks use the same one. The 2018 5.0L added direct injection and changed injectors, so this set stops at 2017.

Shop rebuilt Ford BR3E-E5A / Bosch 0280158227 set of 8 for 2011-2017 F-150 5.0L

F-150 3.7L V6 (2011-2014): BR3E-F5A

Rebuilt Ford BR3E-F5A / Bosch 0280158191 fuel injector set of 6 for 2011-2014 F-150 3.7L V6

The 3.7L was the base V6 from 2011 through 2014. It takes the same BR3E-F5A injector the later 3.5L uses, Bosch 0280158191.

Shop rebuilt Ford BR3E-F5A / Bosch 0280158191 set of 6 for 2011-2014 F-150 3.7L V6

F-150 4.6L V8 (2009-2010): 9L3E-E7A or 9W7E-A7A

Rebuilt Ford 9L3E-E7A / F7A fuel injector set of 8 for 2009-2010 F-150 4.6L 3-valve
Rebuilt Ford 9W7E-A7A / B7A fuel injector set of 8 for 2009-2010 F-150 4.6L 2-valve

Two different 4.6L engines went into these trucks. The 3-valve has an 8 as the 8th digit of the VIN, and it takes 9L3E-E7A or F7A, Denso 195500-4821. The 2-valve has a W there, and it takes 9W7E-A7A or B7A, Denso 195500-4780. They're not the same injector. Check the VIN digit or read the number on yours, then pick the matching set.

Shop rebuilt Ford 9L3E-E7A / F7A set of 8 for 2009-2010 F-150 4.6L 3-valve

Shop rebuilt Ford 9W7E-A7A / B7A set of 8 for 2009-2010 F-150 4.6L 2-valve

F-150 5.4L V8 (2005-2007): 5C3E-DC

Rebuilt Ford 5C3Z-9F593-DB / 5C3E-DC fuel injector set of 8 for 2005-2007 F-150 5.4L

The 3-valve 5.4L takes 5C3E-DC for 2005 and 2006, and for part of 2007. During 2007 Ford moved to another injector. So on a 2007, only order this set if your injectors read 5C3E-DC. A 2004 5.4L is different too.

Shop rebuilt Ford 5C3Z-9F593-DB / 5C3E-DC set of 8 for 2005-2007 F-150 5.4L

F-150 4.2L V6 (1999-2002): XR3E-A6B

Rebuilt Ford XR3E-A6B fuel injector set of 6 for 1999-2002 F-150 4.2L V6

The 1999 4.2L takes Siemens XR3E-A6B. Some 2000 through 2002 trucks have it too, and others have YR3E-A6A. A 2003 takes YR3E-A6A. Read the number first, and only order this set if yours says XR3E-A6B.

Shop rebuilt Ford XR3E-A6B set of 6 for 1999-2002 F-150 4.2L V6

Signs your F-150 needs injectors

  • It shudders at idle in gear and clears up once you're moving.
  • It feels flat pulling a trailer or climbing a grade.
  • A misfire stays on one cylinder after a new plug and a coil swap. Run a compression test before you blame the injector.
  • The first start of the day takes longer than it used to. The fuel pump or battery can do that too.
  • You smell gas at the rail or see it wet. That's a leak. Don't run the truck until it's fixed.

Our leaking fuel injector symptoms guide has the steps.

Common questions

How many fuel injectors does an F-150 have?

One per cylinder on the engines on this page. The V8s have eight and the V6s have six. Each set here is the full count for its engine.

Is my 2009 or 2010 F-150 4.6 a 2-valve or a 3-valve?

Look at the 8th digit of the VIN. An 8 is the 3-valve and a W is the 2-valve. The two engines take different injectors, so settle this before you order.

Will these fit an EcoBoost F-150?

No. The EcoBoost engines use direct injectors that mount in the cylinder head and run at very high pressure. The newer ones add their own port injectors too, and those are a different part. The sets on this page are port injectors for the non-turbo engines.

Related pages

Need help picking a set?

Have your year, make, model and engine ready.

Call (407) 536-4509Message us